Skip to main content


Rapid Charge™ AC/DC Digital Quasi-Resonant PWM Controller


Qualcomm Quick Charge 3.0 Compatible Solution; companion to the iW636

The iW1782 is a high performance AC/DC power supply controller for rapid charge that uses digital control technology to build peak-current mode PWM flyback power supplies. The iW1782 is optimized to work with Dialog’s iW636 secondary-side controller for Qualcomm® Quick Charge™ 3.0 technology, to achieve fast and smooth voltage transition upon request by mobile devices (MD). When paired with the iW636, the iW1782 eliminates the discrete decoders on the primary side, minimizes the external component count and simplifies system designs. The iW636 can communicate with the iW1782 through one opto-coupler for all the necessary rapid charge information including output voltage requests, output current limits, output voltage undershoot and output over-voltage.

The iW1782 also incorporates Dialog’s SmartDefender™ smart hiccup technology to address soft short circuits in charger cables and connectors helping to prevent excessive heat build-up and damage.

Qualcomm® Quick Charge™ is a product of Qualcomm Technologies, Inc.

Lifecycle status

● Active


Supports rapid charge technologies such as Qualcomm® Quick Charge™ 3.0 (QC3.0) technology to provide 3.6V to 12V in 200mV increments with userselected various output current limit combinations

Proprietary secondary-to-primary digital communication and built-in decoder eliminate discrete decoder and significantly simplify system design

Single opto-coupler for all the rapid charge information: output voltage request, output current limit, output voltage undershoot, and over-voltage protection

Tight multi-level constant-voltage and multi-level constant-current regulation with primary-side feedback and control

Ultra-low no-load power consumption with lowest system cost (<10mW at 230VAC with typical 5V2A setting using Schottky diode rectifier; <20mW at 230VAC with typical 5V2A setting using synchronous rectifier)

Fast dynamic load response (DLR) with secondaryside load transient detection

Proprietary optimized load adaptive maximum constant frequency PWM switching with quasi-resonant operation achieves best size, efficiency, and common mode noise

Multi-mode PWM/PFM control improves efficiency at various load conditions

User-configurable 4-level cable drop compensation independent of output voltage

EZ-EMI® design enhances manufacturability

Built-in single-point fault protections against output short-circuit including soft short and half short, output over-voltage, and output over-current

SmartDefender™ smart hiccup technology helps address issues of soft shorts in cables and connectors by effectively reducing the average output power at fault conditions without latch

User-configurable external shutdown control

No audible noise over entire operating range


Rapid-charging AC/DC adapters for smart phones, tablets and other portable devices (3.6V-12V, 1A-3A).

To order a sample of any of our products, please complete the following form. We will provide up to five parts free of charge. Our sales department will provide pricing for samples orders exceeding five parts.

Sample Request Form

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives Register for newsletters
Product Briefs and Summaries
Name Date Version
iW1782 Product Summary (483.77 KB) 11/08/2017 1.3
Name Date Version
iW1782 Datasheet (1.17 MB) (Registered users only) 16/01/2018 1.5
Reference designs
Name Date Version
Reference Design EBC10110: iW1782-01, iW636-00 and iW673-20 18W, 5V/3A,9V/2A,12V/1.5A QC3.0 High Efficiency Design (4.81 MB) (Registered users only) 20/02/2018 1.0
Reference Design EBC10111: iW1782-01, iW636-02 and iW673-20 21W, 5V/3A,9V/2.3A,12V/1.7A QC3.0 High Efficiency Design (5.01 MB) (Registered users only) 20/02/2018 1.0
Reference Design EBC10112: iW1782-01, iW636-01 and iW673-20 24W, 5V/3A,9V/2.7A,12V/2A QC3.0 High Efficiency Design (5.02 MB) (Registered users only) 20/02/2018 1.0
Reference Design EBC10117: iW1782-00 and iW671-00 24W USB PD 5V/3A,6V/3A,7V/3A,8V/3A,9V/2.7A,12V/2A High Efficiency Design (4.35 MB) (Registered users only) 16/05/2017 1.0