Automotive GreenPAK™ Programmable Mixed-signal Matrix with Asynchronous State Machine and Dual Supply

28-GPIO, 5 ACMPs (max.), 12-State ASM, I2C, 12 LUTs (max.), 5 CNT/DLY (max.), 5 DFF/LATCH (max.) and other Macrocells

The GreenPAK product family is based around Dialog Semiconductor's proprietary Zero Static Power ASM (Asynchronous State Machine). This machine is fault tolerant and operates continuously over a wide voltage range with very low latency. The SLG46880-A provides a small, low power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one time Non-Volatile Memory (NVM) to configure the interconnect logic, the IO Pins and the macrocells of the SLG46880-A. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.

Macrocells Overview

  • Two High Speed General Purpose Rail-to-Rail Analog Comparators (ACMPxH);
  • Two Low Power General Purpose Rail-to-Rail Analog Comparators (ACMPxL);
  • Two Voltage References (Vref):
    • Two Vref Outputs;
  • Twelve Combination Function Macrocells:
    • One Selectable DFF/Latch or 2-bit LUT;
    • Four Selectable DFF/Latches or 3-bit LUTs;
    • One Selectable Pipe Delay or Ripple Counter or 3-bit LUT;
    • One Selectable Programmable Pattern Generator or 2-bit LUT;
    • Four Selectable 8-bit CNT/DLYs or 3-bit LUTs;
    • One Selectable 16-bit CNT/DLY or 4-bit LUT;
  • Asynchronous State Machine:
    • Twelve States;
    • Four Dynamic Memory (DM) Macrocells;
    • f(1) Computation Macrocell with dedicated ACMP;
  • Serial Communications:
    • I2C Protocol Interface;
  • Programmable Delay with Edge Detector Output;
  • Deglitch Filter or Edge Detector;
  • Three Oscillators (OSC):
    • 2.048 kHz Oscillator;
    • 2.048 MHz Oscillator;
    • 25 MHz Oscillator;
  • Crystal Oscillator;
  • Analog Temperature Sensor;
  • Power On Reset (POR).


  • Wide Range Power Supply
    • 2.5 V (±8%) to 5 V (±10%) VDD 
    • 2.5 V (±8%) to 5 V (±10%) VDD2 (VDD2 ≤ VDD)
  • RoHS Compliant / Halogen-Free
  • 32-pin STQFN: 4 mm x 4 mm x 0.55 mm, 0.4 mm pitch
  • AEC-Q100 Grade 1


  • In-Vehicle Navigation
  • Infotainment
  • Advanced Driver Assistance Systems (ADAS)
  • Automotive Display Clusters
  • Body Electronics
TQFN-32 (5 x 5 mm)


Contact us for datasheet

For technical support or information on how to buy, contact us directly.

Request Samples Contact Us Register for newsletter

Need technical help?

Visit our support web site to:

  • Get help from Dialog experts online.
  • Search the forums.
  • Access software, drivers, tools & utilities.