- Products
- Power Management
- Connectivity
- Audio
- CODECs & Amplifiers
- Product Selector
- Product Selector
- Wireless Audio
- USB Audio
- CODECs & Amplifiers
- Sensors
- Lighting
- Custom Mixed-Signal ICs (ASICs)
- Power Conversion
- Power Switching
- Memory
- Silicon IP
- GreenPAK Configurable Mixed-Signal
- Timing
- Communications
- IO-Link
- Industrial and Automotive ASICs
- Systems and Software
- IzoT Commissioning Tool (CT)
- IzoT Net Server
- IzoT SDK 2
- IzoT ShortStack SDK
- LNS DDE Server
- LON Upgrade
- LonScanner FX Protocol Analyzer
- Smart Edge Platform
- SmartServer IoT
- SmartServer™ IoT Edge Server
- U10 USB Network Interface
- U20 USB Network Interface
- U60 DIN USB Expansion Modules
- U60 FT USB Network Interface Module
- Current Control
- Motor Control
- Display
- Modules
- Longevity Program
- Product Selector
- Document Search
- Applications
- Application Solution Diagrams
- Connected Health
- Connected Consumer
- Connected rechargeable E-cigarette
- True Wireless Stereo
- USB Type-C ANC Headset
- Beacon, Tracker, Findable
- DECT Ambient Noise Cancellation (ANC) Headset
- Rechargeable E-Cigarette
- Game Controller
- Feature-rich Rechargeable E-Cigarette
- Rechargeable Game Controller
- Bluetooth ANC Headset
- Toothbrush
- Electric MP3 toothbrush
- Voice RCU
- Animal Tracker / Location Tracker
- Wall-to-Battery & Direct Charging
- Smart Home
- Smart Appliances
- Industrial & Infrastructure
- Smart Lighting
- Wearables
- Configurable Mixed-signal IC Solutions
- Smart Home
- Home Appliances
- Networking
- Automotive
- Industrial
- Smart Meters
- SoC PMIC Solutions
- Communications
- Connected Medical
- Transportation
- Application Solution Diagrams
- Support
- Company
You are here
DA2210 and DA2223
DA2210 and DA2223
WattUp® Wireless Power Receivers
A team of engineers is ready to answer your questions
WattUp wire-free charging reduces footprint and increases spatial flexibility in wearables and hearables
DA2210 and DA2223 are RF-to-DC wireless power receivers optimized for wireless charging applications, such as wearables, fitness trackers, hearables, hearing aids, asset trackers, and other battery-powered electronics, where small implementation size and increased spatial freedom during charging provide advantages over coil-based charging solutions.
DA2210 and DA2223 feature four RF-to-DC receiver paths, allowing connection of 1 to 4 antennas dependent upon desired power and antenna area available. Antennas can be small enough to fit into in-the-ear hearing aids. Multiple antennas can be used to increase received power for devices with increased area, such as remote controls or battery banks. Both DA2210 and DA2223 features external RF input matching for improved flexibility and RF-to-DC conversion efficiency. The device DC- outputs are internally clamped to limit the output voltage to within the range of most DC regulators. With a form factor smaller than DA2210, DA2223 is ideal for use in very small electronic devices, thus offering further flexibility in integration.
DA2210 and DA2223 features
- External RF input matching for improved flexibility and RF-to-DC conversion efficiency.
- The device DC- outputs are internally clamped to limit the output voltage to within the range of most DC regulators.
- DA2223: WLCSP version of DA2210
- smaller form factor (1.69mm x 1.39mm max) when compared with DA2210 (3mm x 3mm)
- less than 0.5mm thin
Benefits
- RF/antenna-based solution
- Smaller antenna than coil-based designs
- Improved spatial and orientation freedom
- Eliminates connectors and charging contacts
- Enables fully sealed waterproof design
Applications
-
Fitness Bands
-
Hearables
-
Hearing Aids
-
Bluetooth Headsets
-
Bluetooth Trackers
-
Smart Pens
-
Remote Controls
-
Smart Glasses
Near Field WattUp System
The Near Field WattUp system is comprised of a WattUp wireless power transmitter (DA4100), a WattUp wireless power amplifier (DA3210), a WattUp wireless power receiver (DA2210 or DA2223), a DC regulator, a Li-Ion/Li-Poly battery charger and an optional Bluetooth® Low Energy communication link (DA14680*, DA14681* or DA14585) which supports battery status communication between the WattUp receiver and transmitter. The same link can be used to provide the user with full power management capabilities using the WattUp Application running on a Smartphone or tablet. Antennas are fabricated using low-cost PCB material, flexible PCB or sheet metal.
Near Field WattUp System
*DA14682 and DA14683 are recommended for new designs.
Resources
Product Briefs and Summaries
- DA2210 and DA2223 Product Brief (361.87 KB)
- DA3210 Product Brief (338.15 KB)
- DA4100 Product Brief (328.81 KB)
- Dialog & Energous Product Brief (680.88 KB)
- Near Field WattUp® Wire-Free Charging (394.66 KB)
Interested?
Get in touch with us to below to receive additional technical documentation, support and information on how to buy.
Need technical help?
Visit our support web site to:
- Get help from Dialog experts online.
- Search the forums.
- Access software, drivers, tools & utilities.