iW662

Integrated Secondary-Side Synchronous Rectifier Controller and RapidCharge™ Interface IC for Qualcomm® Quick Charge™ 3.0 and 2.0 Applications

A team of engineers is ready to answer your questions

Enter forums

Uses Dialog’s XM-Comm Technology to Remove All Optocouplers from Rapid Charge Solutions

The iW662 integrated secondary-side synchronous rectifier controller and rapid charge interface IC uses Dialog’s XM-Comm technology to communicate back to the primary-side controller, the (iW1790, iW1796, iW1798) eliminating the need for optocouplers to create solutions for rapid charging protocols such as Qualcomm Quick Charge 3.0 and 2.0 technology.

The device also integrates a synchronous rectifier controller that uses adaptive off-time control to remove the need for a parallel schottky diode to reduce power loss during transitions. The total solution reduces overall BOM cost and improves efficiency in reduced form-factor travel adapters.

The iW1790+iW662 chipset uses Dialog's advanced fault control technology to help address soft shorts in cables and connectors. Learn more about advanced hiccup technology here.

Qualcomm® Quick Charge™ is a product of Qualcomm Technologies, Inc.

Features

Integrates RapidCharge Interface IC and Synchronous Rectifier Controller in a Single IC
XM-Comm - Proprietary Secondary-to-Primary Digital Communication via Power Transformer:
- No need for Optocoupler
- Reduces BOM and Significantly Simplifies Design
- Handles All Rapid Charging Information
Supports Multiple RapidCharge Protocols
- Qualcomm Quick Charge 3.0
- Qualcomm Quick Charge 2.0
Synchronous Rectifier Controller
- High-voltage Drain Sensing up to 100 V With No Additional External Clamping Circuits Required
- Lossless MOSFET VDS Sensing for SR Timing Control with Digital Adaptive Turn-Off Control
- Optimized 5 V MOSFET Gate Driver

Double-layer cable protection:
- Secondary side (iW662): Proprietary D+/D- Overvoltage Protection (OVP) Addresses VBUS D+/D Soft Shorts
- Primary side (iW1790, iW1796, iW1798): Advanced Cable Fault Protection Reduces Average Output Power at Fault
Intelligent Low Power Mode Enables < 20 mW No-load Power Consumption
Dual Over-Temperature Protection (OTP)
- On-chip Temperature Sensing Circuit and External NTC