System PMIC for Multi-Core Application Processors
Powerful DC-DC converter system featuring 33 regulators
DA9068 is a power management unit (PMU) optimized for supplying systems with multi-core CPUs, I/O, DDR memory, and peripherals.
The PMIC features dual-phase, single-phase, and RF buck converters. High efficiency is achieved over a wide load range. All power switches are integrated and a high switching frequency allows low-profile inductors to be used.
DA9068 also includes additional modules such as real time clock (RTC), general purpose 12-bit ADC (GPADC) and general purpose I/O pins (GPIO). These support different functions such as battery voltage supervision and device over-temperature protection. All DA9068 features can be accessed by software via the host processor, allowing high flexibility of applications.
Controlled by a programmable digital power manager, the user-programmable switched/linear regulators may be configured to meet the start-up sequence, voltage, and timing requirements for most applications. Dynamic Voltage Scaling (DVS) is available to achieve optimal processor energy-per-task performance. Dialog’s patented SmartMirror™ dynamic biasing is implemented on all linear regulators.
Dynamic voltage control (DVC) allows supply voltages of DA9068 to be controlled dynamically according to the operating point of the system. The control can be realized via direct register writes through the I2C interface or via GPIOs.
Input voltage 2.8 V to 4.5 V
8 buck converters with dynamic voltage control
- 2 x 4000 mA Dual Phase
- 1 x 1500 mA
- 1 x 1000 mA
- 3 x 600 mA
- 1 x 1000 mA
25 LDO regulators
- 8 x 150 mA
- 6 x 200 mA
- 8 x 300 mA
- 3 x 400 mA
Programmable power-mode sequencer
System supply and junction temperature monitoring
12-bit general purpose ADC
Coin cell/super-capacitor charger
Ultra-low-power real-time clock with alarm
32 kHz oscillator with an external crystal
Enhanced Energy Saving techniques:
- Dynamic Voltage Scaling (DVS)
- Programmable power manager
- System supply monitoring
- Junction temperature monitoring
- Watchdog timer
-30 °C to +85 °C junction temperature operation
Supply for multi-core application processors
WLCSP (4 x 6 mm, 0.4 mm pitch)