iW3623

iW3623

Flickerless™, Non-Dimmable 45W Solid State Lighting LED Driver with High PF (> 0.95), Low THD (<10%) and Low Output Ripple (<5%) (Two-Stage)

A team of engineers is ready to answer your questions

Non-dimmable LED driver for 45W commercial SSL lighting

The iW3623 is a high performance, two-stage, non-dimmable 45W SSL LED driver that integrates boost and flyback converters into a single IC to reduce BOM cost and simplify design versus conventional two-stage driver approaches. Compliant to the IEC61000-3-2 standard, the iW3623 offers Power Factor (PF) >0.95 from a universal input voltage of 100VAC to 277VAC, with total harmonic distortion (THD) <10% and low output ripple <5% over the entire range.

The iW3623 incorporates Dialog’s proprietary PrimAccurate™ primary-side control technology, eliminating the need for a secondary-side regulator and optical feedback isolator. It also allows FETs to be replaced with lower cost BJTs and uses quasi-resonant mode switching for both the boost and flyback stages and dynamic base current to optimize conversion efficiency and minimize EMI.

Protection features include an on-board, external NTC-based temperature protection circuit that reduces the output drive to the LEDs to protect the circuit from overheating while maintaining light output. For more information on the over-temperature protection derating feature, click here.

Features

  • High PF (>0.95) and Low THD (< 10%)
  • Low Output Ripple Current (<5%)
  • PrimAccurate™ - Isolated Off-Line AC/DC Controller
  • 45W LED Driver for Non-Dimmable Commercial Solid-State Lighting Applications
  • Flickerless™ Technology
    • Removes Virtually All LED Flicker
  • Resonant Mode for Optimal Efficiency

Features

  • Fully Protected
    • NTC-based Temperature Derating Circuit
    • Over-Voltage/Over-Temperature Protection
    • Output Over-Voltage, Over-Current and Short Circuit
    • Open LED Fault Detection
    • Sense-Resistor Short Circuit Protection
    • Single-Fault Protection

Applications

  • Non-Dimmable LED Lamps and Luminaires
  • Optimized for up to 45W Output Power

Block Diagrams

Typical Applications Diagram
,
Functional Block Diagram

For technical support or information on how to buy, contact us directly.

Request Samples Contact Us Register for newsletter

Need technical help?

Visit our support web site to:

  • Get help from Dialog experts online.
  • Search the forums.
  • Access software, drivers, tools & utilities.