Skip to main content

SLG46120

GreenPAK™ Programmable Mixed-signal Matrix

slg46120_block-diagram.png

10-GPIO, 2 ACMPs, 16 LUTs (max.), 4 CNT/DLY (max.), 8 DFF/LATCH (max.) and other Macrocells

The SLG46120 provides a small, low power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one time Non-Volatile Memory (NVM) to configure the interconnect logic, the I/O Pins and the macrocells of the SLG46120. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.

Lifecycle status

● Active

Macrocells Overview

Two Analog Comparators (ACMP);

Voltage References (Vref);

Five Combinatorial Look Up Tables (LUTs):

  • One 2-bit LUT;
  • Four 3-bit LUTs;

Twelve Combination Function Macro cell:

  • Four Selectable DFF/Latch or 2-bit LUTs;
  • Four Selectable DFF/Latch or 3-bit LUTs;
  • One Selectable Pipe Delay or 3-bit LUT:
    • Pipe Delay - 8 stage / 2 output;
  • One Bandgap;
  • Two Selectable Counter/Delay or 4-bit LUT;
  • One Programmable Delay / Deglitch Filter;

Two Counter / Delay Generators (CNT/DLY):

  • One 8-bit counter/delay;
  • One 14-bit counter/delay with external clock/reset;

Eight D Flip-Flop / Latches (DFF) (Part of Combination Function Macrocell);

Pipe Delay - 8 stage/2 output (Part of Combination Function Macrocell);

RC Oscillator (RC OSC);

Power-On-Reset (POR).

Features

Logic & Mixed Signal Circuits

Highly Versatile Macrocells

1.8V (±5%) to 5V (±10%) Supply

Operating Temperature Range: -40°C to 85°C

RoHS Compliant / Halogen-Free

Pb-Free 12-pin STQFN

Applications

Personal Computers and Servers

PC Peripherals

Consumer Electronics

Data Communications Equipment

Handheld and Portable Electronics

Packages and Ordering

SLG46120V: STQFN-12 (1.6 x 1.6 x 0.55 mm, 0.4 mm pitch)

SLG46120P: STQFN-12 (2.0 x 2.0 x 0.55 mm, 0.5 mm pitch)

The product ID suffix indicates the package style.

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives Register for newsletters
Video thumbnail, click to open and play

GreenPAK Configurable Mixed-signal IC Introduction

Video thumbnail, click to open and play

GreenPAK Designer Software

Video thumbnail, click to open and play

GreenPAK Development Platform

Video thumbnail, click to open and play

Choosing the Right GreenPAK

Video thumbnail, click to open and play

GreenPAK SPICE Introduction

Video thumbnail, click to open and play

LED Dimmer

View the full list of the GreenPAK videos in our Training Video Library.

This product is available in two packages:

SLG46120V: STQFN-12 (1.6 x 1.6 x 0.55 mm, 0.4 mm pitch)

SLG46120P: STQFN-12 (2.0 x 2.0 x 0.55 mm, 0.5 mm pitch)

The development board comparison tool below recommends the V version of the chip, but you can also use the P version - see further down the page to purchase those components.


Development board selector

GreenPAK Development Board

Provides full programming, emulation and testing functions for GreenPAK devices. For use with SLG46xxxX-SKT sockets kits.

Working in tandem with the GreenPAK Designer software, GreenPAK Advanced Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Develop using any GreenPAK device
Suitable for:
  • Programming
  • Emulation
  • Signal and Logic Generators
Features:
  • USB interface
  • MacOS, Windows and Linux compatible
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
  • Integrated signal and logic generators
  • LEDs for visual indication
GreenPAK Advanced Development Board
This item is out of stock.
$99.00
Recommended add-on:
SLG46120V-SKT
$35.00
DIP

Perfect for breadboarding and fast prototypes.

Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
Suitable for:
  • Programming
  • Emulation
Features:
  • USB interface
  • MacOS, Windows and Linux compatible
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
GreenPAK DIP Development Board
$29.99
Recommended add-on:
SLG46120V-DIP
$1.25
GreenPAK Development Board

GreenPAK Advanced Development Board

Provides full programming, emulation and testing functions for GreenPAK devices.
  • Programming
  • Emulation
  • Signal and Logic Generators
GreenPAK Advanced Development Board
This item is out of stock.
$99.00
Recommended add-on:
SLG46824V-SKT
$35.00
DIP

GreenPAK DIP Development Board

Perfect for breadboarding and fast prototypes.

Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Programming
  • Emulation
GreenPAK DIP Development Board
$29.99
Recommended add-on:
SLG46824V-DIP
This item is out of stock.
$1.25

Other components

GPAK3 SLG46110V

Programmable Mixed-signal Matrix. 1.8 V to 5.5 V. 10-GPIO, 2 ACMPs, 5 LUTs, 11 Combination Function Macrocells and other Counter/Delay/FF Macrocells. Package: STQFN-12.

Price table:

Qty 1-50 51+
Price Free* $0.30

*You only pay for shipping

SLG46120V (un-programmed)

Note: All parts will be shipped in tape form.

$0.30
GPAK3 SLG46110V

Programmable Mixed-signal Matrix. 1.8 V to 5.5 V. 10-GPIO, 2 ACMPs, 5 LUTs, 11 Combination Function Macrocells and other Counter/Delay/FF Macrocells. Package: STQFN-12.

Price table:

Qty 500-2,999 3,000-8,999 9,000+
Price $0.30 $0.25 Contact Dialog

A unique marking will be assigned to each programmed unit. If you already have a PN assigned, please indicate it in comments field during checkout.

SLG46120V (programmed)

Note: All parts will be shipped in tape form.

$0.30
slg4sa12-16x16-kit.jpg

Included are: SLG4SA12-16x16 socket adapter, 50 SLG46120V samples.

SLG46120V-SKT
$35.00
SLG46120V-DIP

20-pin DIP Proto Board*. Perfect for breadboarding and fast prototypes.

*requires the GreenPAK DIP Adapter (SLG4SA-DIP) to use it with the GreenPAK Advanced Development Board.

SLG46120V-DIP
$1.25
SLG4SA-DIP

GreenPAK DIP Adapter for GreenPAK Advanced Development Board. Allows the use of the SLG46xxxV-DIP Proto boards with the GreenPAK Advanced Development Board. Acts as the bridge between Advanced and DIP Development Platforms.

SLG4SA-DIP
$7.25

You can no longer post questions or comments on this page. All product forum activity on the Dialog Semiconductor website are being migrated to a new platform called RenesasRulz communicated to users 4 May. Renesas Electronics Corporation (“Renesas”) will be the service provider and processor managing this move on behalf of Dialog Semiconductor PLC. (“Dialog Semiconductor”). In due course you will receive a welcome email from Renesas providing detailed information on accessing your new RenesasRulz account.

Back to results

GreenPAK and GreenFET

4 months ago

SLG4DVKDIP Firmware Outdated?

Posted by nemesis123 25 points 7 replies
0 upvotes

Hello everybody. I have problem with SLG4DVKDIP in GreenPAK Designer. While connected to usb, blue LED blink 10 times and in the debugging controls are not activated buttons with emulation/test mode/ Read/Program.

The board is recently purchased from Mouse. Board version is v1.0.3.

Is it possible to send me old version of GreenPAK designer - version before 6.19 ?

Thank you.

4 months ago

olehs

Hi nemesis123, 

Which software version you are currently using, is it 6.27 Built 001? If no, could you install the latest software and try again? 

We will check the possible issue in the GreenPAK designer, but it seems that either connection fails or the board is damaged. So please try to use another USB cable, otherwise, the board should be replaced. 

Best regards, 

Oleh Sapiha

4 months ago

nemesis123 25 points

Hi Oleh,

I am using the latest version of GreenPAK Designer v6.27.001 WIN64.

When I pressing Debug button in application and i select the GreenPAK DIP Development Platform. 
The hardware constantly connects and disconnects. During this state the blue LED flashes.
The status of the "USB Input Device", which belongs to the GreenPAK DIP kit, is constantly updated in the device managers. 

USB device name is "USB Input Device".
    USB\VID_0F0F&PID_800A&REV_3001
    USB\VID_0F0F&PID_800A

In folder "\Program Files\Dialog Semiconductor\Go Configure Software Hub v.6.27\driver\" is not driver with DeviceID = "VID_0F0F&PID_800A".

System information:
Detected chip:
Part number: N/D
Revision: N/D
Pattern ID: N/D
Date code: N/D
Lot number: N/D

Development Board:
Type: N/D
Hardware ID: N/D
Firmware ID: N/D

GreenPAK Designer:
Part number: SLG47004V
Version: 6.27
Build: 001

Operating System:
Name: Windows 7 Version 6.1 (Build 7601: SP 1)
Architecture: 64-bit

 

Thank you.

 

4 months ago

olehs

Hi nemesis123, 

Thank you for all information you sent. Today our software and hardware teams were investigating your problem and we haven't found any problem from the software or hardware side which could cause your issue. Regarding this could you please also check a few things which can help us in our investigation. 

Could you make a photo of Dev board including DIP adapted plugged in and cable you are using? 

How the device is displayed in Device Manager?

Could you also check if any of the components in DIP board is heated? 

Could you make a screenshot of the GreenPAK designer in Debug mode when the board is connected?

Could also start the Debug mode without dip adapted plugged in and check if there will be some differences?

Thank you for your cooperation. 

Best regards, 

Oleh Sapiha

 

 

 

4 months ago

nemesis123 25 points

Hi Oleh,

 

I am answer for your questions:

** Could you make a photo of Dev board including DIP adapted plugged in and cable you are using? 

Photo "01_SLG4DVKDIP_pcb.jpg"

** How the device is displayed in Device Manager?

USB device name is "USB Input Device".
    USB\VID_0F0F&PID_800A&REV_3001
    USB\VID_0F0F&PID_800A

Screenshot "02_devicemanager_SLG4DVKDIP_1.png,02_devicemanager_SLG4DVKDIP_2.png"

** Could you also check if any of the components in DIP board is heated? 

Components on DIP board it is OK (not heated).

 

** Could you make a screenshot of the GreenPAK designer in Debug mode when the board is connected?

Screenshot "04_GreenPAK Designer_Debug_1.PNG,04_GreenPAK Designer_Debug_2.PNG,04_GreenPAK Designer_Debug_3.PNG"

 

** Could also start the Debug mode without dip adapted plugged in and check if there will be some differences?

There are no differences.

 

I tested this board on different computer with OS Windows 10 and the result was the same (not working).

Is it possible to make board firmware update with other utility?

Do you sell only SLG4DVKDIP kit with HW version 1.0.3 ?

 

Thank you.

Attachment Size
photo of Dev board including DIP adapted plugged 1.18 MB
device is displayed in Device Manager 94.96 KB
device is displayed in Device Manager 109.73 KB
GreenPAK designer in Debug mode 368.09 KB
GreenPAK designer in Debug mode 222.05 KB
GreenPAK designer in Debug mode 220.91 KB

3 months ago

olehs

nemesis123,

Sorry for that delayed response. I've received the feedback from our software and hardware team, they didn't find any problem with software and hardware, so their verdict is to replace the board. As I was told the there is only one version of firmware with is accessible.  

Best regards, 

Oleh Sapiha

3 months ago

nemesis123 25 points

How can I replace the board?

I bought the board from Mousers 2 weeks ago.

Thank you

3 months ago

olehs

nemesis123, 

You have to ask Mousers how to replace the board. 

Best regards, 

Oleh Sapiha