SLG46867

10-GPIO, 4 ACMPs (max.), I2C, 23 LUTs (max.), 8 CNT/DLY (max.), 21 DFF/LATCH (max.), Dual 45mΩ, 2A P-FET and other Macrocells

The SLG46867 provides a small, low power component for commonly used mixed-signal functions. The user creates their circuit design by programming the time programmable (OTP) Non-Volatile Memory (NVM) to configure the interconnect logic, the IO Pins and the macrocells of the SLG46867. This highly versatile device allows a wide variety of mixedsignal functions to be designed within a very small, low power single integrated circuit.

Two High Speed General Purpose Analog Comparators (ACMPxH);

Two Low Power General Purpose Analog Comparators (ACMPxL);

Two Voltage References (Vref):

• Two Vref Outputs;

Fifteen Combination Function Macrocells:

• Three Selectable DFF/Latch or 2-bit LUTs;
• One Selectable Programmable Pattern Generator or 2-bit LUT;
• Nine Selectable DFF/Latch or 3-bit LUTs;
• One Selectable Pipe Delay or Ripple Counter or 3-bit LUT;
• One Selectable DFF/Latch or 4-bit LUTs;

Eight Multi-Function Macrocells:

• Seven Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters;
• One Selectable DFF/Latch or 4-bit LUT + 16-bit Delay/Counter;

Serial Communications:

• I2C Protocol Interface;

Programmable Delay with Edge Detector Output;

Deglitch Filter or Edge Detector;

Three Oscillators (OSC):

• 2.048 kHz Oscillator;
• 2.048 MHz Oscillator;
• 25 MHz Oscillator;

Analog Temperature Sensor;

Power-On Reset (POR);

Dual P-FET Power Switch;

Read Back Protection (Read Lock);

Power Supply:

• 2.5 V (±8 %) to 5 V (±10 %);

Operating Temperature Range: -40°C to 85°C;

RoHS Compliant / Halogen-Free / Pb-Free;

Power Sequencing with Complex Analog Control

Power Plane Component Size Reduction Project

Consumer Electronics

LED Driver

Haptic Motor Driver

System RESET with Power Switch

SLG46867M: MSTQFN-20 (1.6 x 3.0 x 0.4 mm, 0.4 mm pitch)

The product ID suffix indicates the package style.