SLG46117

Soft-Start 1.25 A P-Ch MOSFET w/ Discharge, 7-GPIO, 2 ACMPs, 10 LUTs (max.), 4 CNT/DLY (max.), 4 DFF/LATCH (max.) and other Macrocells

The SLG46117 GreenPAK combines the functionality and versatility of a GreenPAK Programmable Mixed-signal Matrix with the capabilities of Dialog’s CuFET technology. Capable of integrating a number common discrete ICs and passive components into a single device, the GreenPAK family’s SLG46117 enables high power switching with a soft-start 1.25 A P-Ch MOSFET with slew rate control and integrated discharge resistor.

Two Analog Comparators (ACMP);

Voltage References (Vref);

Four Combinatorial Look Up Tables (LUTs):

• Two 2-bit LUTs;
• Two 3-bit LUTs;

Seven Combination Function Macrocell:

• Two Selectable DFF/Latch or 2-bit LUTs;
• Two Selectable DFF/Latch or 3-bit LUTs;
• One Selectable Pipe Delay or 3-bit LUT:
  • Pipe Delay – 8 stage / 2 output;
• One Selectable Counter/Delay or 4-bit LUT;
• One Programmable Delay/ Deglitch Filter;

Three Counter / Delay Generators (CNT/DLY):

• Three 8-bit counter/delays with external clock/reset;

Four D Flip-Flop / Latches (DFF) (Part of Combination Function Macrocell);

Pipe Delay – 8 stage/2 output (Part of Combination Function Macrocell);

Trimmed RC Oscillator (RC OSC);

Power On Reset (POR);

One Bandgap;

Soft-Start P-FET Power Switch:

• Power Switch IDS: 1.25 A;
• Slew Rate Control;
• VIN: 1.5 V to 5.5 V;
• Integrated Discharge Resistor;
• Low R_DSON:
  • 28.5 mΩ @ 5.0 V;
  • 36.4 mΩ @ 3.3 V;
  • 44.3 mΩ @ 2.5 V;
  • 60.8 mΩ @ 1.8 V;
  • 77.6 mΩ @ 1.5 V.

Logic & Mixed Signal Circuits

Highly Versatile Macrocells

Read Back Protection (Read Lock)

1.8V (±5%) to 5V (±10%) Supply

Operating Temperature Range -40 °C to 85 °C

Soft-Start 1.25 A P-FET Power Switch with discharge

Pb-Free / Halogen-Free / RoHS compliant

Power Sequencing with complex analog control

Power Plane component size reduction project

LED Driver

Haptic Motor Driver

System RESET with Power Switch

SLG46117V: STQFN-14L (1.6 x 2.5 x 0.55 mm, 0.4 mm pitch)

The product ID suffix indicates the package style.