
SLG46583
GreenPAK™ Programmable Mixed-signal Matrix with Asynchronous State Machine and LDOs

9-GPIO, 4 ACMPs, 8-State ASM, I2C, 16 LUTs (max.), 5 CNT/DLY (max.), 9 DFF/LATCH (max.) and other Macrocells
The SLG46580, SLG46582, and SLG46583 are small, low power components commonly used to integrate mixed-signal functions under control of an asynchronous state machine. The user creates the circuit design by programming the one time Non-Volatile Memory (NVM) to configure the interconnect logic, the I/O Pins and the macro cells of the SLG46580, SLG46582, and SLG46583. This highly versatile device allows a wide variety of functions and control logic to be designed within a very small, low power monolithic integrated circuit.
Lifecycle status
Macrocells Overview
Four Analog Comparators (ACMP);
Voltage Reference (Vref) for ACMPs;
Analog Temperature Sensor;
Fifteen Combination Function Macrocells:
- Three Selectable DFF/Latch or 2-bit LUTs;
- Six Selectable DFF/Latch or 3-bit LUTs;
- One Selectable Pipe Delay or Ripple Counter or 3-bit LUT;
- Five 8-bit delays/counters or 3-bit LUTs;
Combinatorial Logic:
- One 4-bit LUT with two outputs;
Asynchronous State Machine:
- Eight States;
- Flexible input logic from state transitions;
Real Time Clock (RTC) Binary Counter;
Four Tri-Mode 150 mA LDO Regulators (for SLG46580):
- High Power Mode (HP Mode): 150 mA output with Quiescent Current at ~80 μA;
- Low Power Mode (LP Mode): 100 μA output with Quiescent Current at ~5 μA;
- Bypass Mode: Acts like a load switch;
Two Tri-Mode 300 mA LDO Regulators (for SLG46582):
- High Power Mode (HP Mode): 300 mA output with Quiescent Current at ~80 μA;
- Low Power Mode (LP Mode): 200 μA output with Quiescent Current at ~5 μA;
- Bypass Mode: Acts like a load switch;
One Tri-Mode 600 mA LDO Regulators (for SLG46583):
- High Power Mode (HP Mode): 600 mA output with Quiescent Current at ~60 μA;
- Low Power Mode (LP Mode): 400 μA output with Quiescent Current at ~5 μA;
- Bypass Mode: Acts like a load switch;
Serial Communications:
- I2C Slave Protocol Interface;
Programmable Delay with Edge Detector Output;
Additional Logic Functions:
- 2 Deglitch Filters with Edge Detectors;
Two Oscillators (OSC):
- Configurable 25 kHz/2 MHz;
- 2 kHz Low Power Oscillator;
Eight Byte RAM + OTP User Memory:
- RAM Memory space that is readable and writable via I2C;
- User defined initial values transferred from OTP;
POR.
Features
Programmable Asynchronous State Machine
Logic & Mixed Signal Circuits
Highly Versatile Macrocells
Read Back Protection (Read Lock)
Four 150 mA LDO Regulators (SLG46580)
Two 300 mA LDO Regulators (SLG46582)
One 600 mA LDO Regulators (SLG46583)
I2C Interface
2.5 V (±8%) to 5 V (±10%) Supply
Operating Temperature Range: -40°C to 85°C
RoHS Compliant / Halogen-Free
Packages and Ordering
SLG46583V: STQFN-20 (2.0 x 3.0 x 0.55 mm, 0.4 mm pitch)
The product ID suffix indicates the package style.
Stay connected
Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.
Inquiries Distributors and Representatives Register for newslettersGreenPAK Configurable Mixed-signal IC Introduction
GreenPAK Designer Software
GreenPAK Development Platform
Choosing the Right GreenPAK
GreenPAK I2C
GreenPAK's Asynchronous State Machine
Asynchronous State Machine vs MCU
Power Sequencing with LDOs
View the full list of the GreenPAK videos in our Training Video Library.
This product is available in one package:
SLG46583V: STQFN-20 (2.0 x 3.0 x 0.55 mm, 0.4 mm pitch)
Development board selector

Provides full programming, emulation and testing functions for GreenPAK devices. For use with SLG46xxxX-SKT sockets kits.
Working in tandem with the GreenPAK Designer software, GreenPAK Advanced Development Board allows designers to:
- Program custom samples in minutes
- Test GreenPAK projects in-circuit
- Develop using any GreenPAK device
- Programming
- Emulation
- Signal and Logic Generators
- USB interface
- MacOS, Windows and Linux compatible
- Programming and Emulation
- Gated expansion header for connection to external test equipment
- Integrated signal and logic generators
- LEDs for visual indication

Perfect for breadboarding and fast prototypes.
Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:
- Program custom samples in minutes
- Test GreenPAK projects in-circuit
- Programming
- Emulation
- USB interface
- MacOS, Windows and Linux compatible
- Programming and Emulation
- Gated expansion header for connection to external test equipment

GreenPAK Development Board for Serial Debugging and In-System Programmability.
- Can support serial debugging for all GreenPAK parts with I²C
- Serial programming for SLG46824, SLG46826, and SLG47004
- Very helpful in late stages of development when doing debug on-board is easiest

GreenPAK Advanced Development Board
- Programming
- Emulation
- Signal and Logic Generators

GreenPAK DIP Development Board
Perfect for breadboarding and fast prototypes.
Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:
- Program custom samples in minutes
- Test GreenPAK projects in-circuit
- Programming
- Emulation

GreenPAK Serial Debugger Board (GSD)
GreenPAK Development Board for Serial Debugging and In-System Programmability.
- Can support serial debugging for all GreenPAK parts with I²C
- Serial programming for SLG46824, SLG46826, and SLG47004
- Very helpful in late stages of development when doing debug on-board is easiest
Other components

Programmable Mixed-signal Matrix with Asynchronous State Machine and LDOs. 9-GPIO, 4 ACMPs, 8-State ASM, I2C, 16 LUTs (max.), 5 CNT/DLY (max.), 9 DFF/LATCH (max.) and other Macrocells. Package: STQFN-20 (2.0 x 3.0 mm).
Price table:
Qty | 1-50 | 51+ |
---|---|---|
Price | Free* | $0.40 |
*You only pay for shipping

Programmable Mixed-signal Matrix with Asynchronous State Machine and LDOs. 9-GPIO, 4 ACMPs, 8-State ASM, I2C, 16 LUTs (max.), 5 CNT/DLY (max.), 9 DFF/LATCH (max.) and other Macrocells. Package: STQFN-20 (2.0 x 3.0 mm).
Price table:
Qty | 500-2,999 | 3,000-8,999 | 9,000+ |
---|---|---|---|
Price | $0.40 | $0.35 | Contact Dialog |
A unique marking will be assigned to each programmed unit. If you already have a PN assigned, please indicate it in comments field during checkout.

Included are: SLG4SA20LD-20x30 socket adapter, 50 SLG46583V samples.
You can no longer post questions or comments on this page. All product forum activity on the Dialog Semiconductor website are being migrated to a new platform called RenesasRulz communicated to users 4 May. Renesas Electronics Corporation (“Renesas”) will be the service provider and processor managing this move on behalf of Dialog Semiconductor PLC. (“Dialog Semiconductor”). In due course you will receive a welcome email from Renesas providing detailed information on accessing your new RenesasRulz account.
6 months ago
Vary PWM duty cycle based on analog value: an-1056
Posted by jnorris 60 points 4 replies3 weeks ago