Skip to main content

SLG46827-A

Automotive GreenPAK™ Programmable Mixed-signal Matrix with In-System Programmability

SLG46827-A Block Diagram

17-GPIO, 4 ACMPs, I2C, 19 LUTs (max.), 8 CNT/DLY (max.), 17 DFF/LATCH (max.) and other Macrocells

The SLG46827-A provides a small, low power component for commonly used mixed-signal functions. The user creates the circuit design by programming the multiple time Non-Volatile Memory (NVM) to configure the interconnect logic, the IOs and the macrocells of the SLG46826. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.

Lifecycle status

● Active

Macrocells Overview

Two High Speed General Purpose Rail-to-Rail Analog Comparators (ACMPxH);

Two Low Power General Purpose Rail-to-Rail Analog Comparators (ACMPxL);

Two Voltage References (Vref)

  • Two Vref Outputs; 

Eleven Combination Function Macrocells:

  • Three Selectable DFF/Latch or 2-bit LUTs;
  • One Selectable Programmable Pattern Generator or 2-bit LUT;
  • Six Selectable DFF/Latch or 3-bit LUTs;
  • One Selectable Pipe Delay or Ripple Counter or 3-bit LUT;

Eight Multi-Function Macrocells:

  • Seven Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters;
  • One Selectable DFF/Latch or 4-bit LUT + 16-bit Delay/Counter;

Serial Communications:

  • I2C Protocol Interface;

Programmable Delay with Edge Detector Output;

Deglitch Filter with Edge Detector;

Three Oscillators (OSC):

  • 2.048 kHz Oscillator;
  • 2.048 MHz Oscillator;
  • 25 MHz Oscillator;

Analog Temperature Sensor;

Power On Reset (POR).

Features

In-System-Debug Feature

Multiple Time Programmable Memory In Development

Wide Range Power Supply

  • 2.5 V (±8%) to 5 V (±10%) VDD 
  • 1.8 V (±5%) to 5 V (±10%) VDD2 (VDD2 ≤ VDD

RoHS Compliant / Halogen-Free

AEC-Q100 Grade 2

Applications

In-Vehicle Navigation

Infotainment

Advanced Driver Assistance Systems (ADAS)

Automotive Display Clusters

Body Electronics

Packages and Ordering

SLG46827-AG: TSSOP-20 (6.5 x 6.4 x 1.2 mm, 0.65 mm pitch)

The product ID suffix indicates the package style.

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives Register for newsletters
Datasheets
Name Date Version
SLG46827-A Datasheet (2.54 MB) 24/02/2021 3.2
Errata
Name Date Version
SLG46827-A Errata (520.65 KB) 31/03/2021 1.2
User guides and manuals
Name Date Version
GSD Quick Start Guide (181.06 KB) 23/10/2020 1.0
RoHS and Reach
Name Date Version
Dialog Environmental Statement for IC Products (1.06 MB)
Video thumbnail, click to open and play

GreenPAK Configurable Mixed-signal IC Introduction

Video thumbnail, click to open and play

GreenPAK Designer Software

Video thumbnail, click to open and play

GreenPAK Development Platform

Video thumbnail, click to open and play

Choosing the Right GreenPAK

Video thumbnail, click to open and play

GreenPAK I2C

Video thumbnail, click to open and play

GreenPAK SPICE Introduction

View the full list of the GreenPAK videos in our Training Video Library.

This product is available in one package:

SLG46827-AG: TSSOP-20 (6.5 x 6.4 x 1.2 mm, 0.65 mm pitch)


Development board selector

GreenPAK Development Board

Provides full programming, emulation and testing functions for GreenPAK devices. For use with SLG46xxxX-SKT sockets kits.

Working in tandem with the GreenPAK Designer software, GreenPAK Advanced Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Develop using any GreenPAK device
Suitable for:
  • Programming
  • Emulation
  • Signal and Logic Generators
Features:
  • USB interface
  • MacOS, Windows and Linux compatible
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
  • Integrated signal and logic generators
  • LEDs for visual indication
GreenPAK Advanced Development Board
This item is out of stock.
$99.00
Recommended add-on:
SLG46827AG-SKT
$35.00
DIP

Perfect for breadboarding and fast prototypes.

Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
Suitable for:
  • Programming
  • Emulation
Features:
  • USB interface
  • MacOS, Windows and Linux compatible
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
GreenPAK DIP Development Board
$29.99
SLG4DVKISP

GreenPAK Development Board for Serial Debugging and In-System Programmability.

  • Can support serial debugging for all GreenPAK parts with I²C
  • Serial programming for SLG46824, SLG46826, and SLG47004
  • Very helpful in late stages of development when doing debug on-board is easiest
GreenPAK Serial Debugger Board (GSD)
This item is out of stock.
$28.75
GreenPAK Development Board

GreenPAK Advanced Development Board

Provides full programming, emulation and testing functions for GreenPAK devices.
  • Programming
  • Emulation
  • Signal and Logic Generators
GreenPAK Advanced Development Board
This item is out of stock.
$99.00
Recommended add-on:
SLG46116V-SKT
$35.00
DIP

GreenPAK DIP Development Board

Perfect for breadboarding and fast prototypes.

Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Programming
  • Emulation
GreenPAK DIP Development Board
$29.99
Recommended add-on:
SLG46116V-DIP
$1.25
SLG4DVKISP

GreenPAK Serial Debugger Board (GSD)

GreenPAK Development Board for Serial Debugging and In-System Programmability.

  • Can support serial debugging for all GreenPAK parts with I²C
  • Serial programming for SLG46824, SLG46826, and SLG47004
  • Very helpful in late stages of development when doing debug on-board is easiest
GreenPAK Serial Debugger Board (GSD)
This item is out of stock.
$28.75

Other components

SLG46827-A

Programmable Mixed-signal Matrix. VDD1 = 2.3 to 5.5V VDD2 = 1.71-5.5V. 15-GPIO, 4 ACMP, 11 LUTs, 8 Multi-functional Macrocells, and other Counter/Delay/FF Macrocells. Package: TSSOP-20.

Price table:

Qty 100+
Price $0.60
SLG46827-A (un-programmed)

Note: All parts will be shipped in tape form.

$0.60
SLG46827-A

Programmable Mixed-signal Matrix. VDD1 = 2.3 to 5.5V, VDD2 = 1.71 to 5.5V. 15-GPIO, 4 ACMP, 11 LUTs, 8 Multi-functional Macrocells, and other Counter/Delay/FF Macrocells. Package: TSSOP-20.

SLG46827-A (programmed)

Note: All parts will be shipped in tape form.

$0.60
TSSOP-20n2

Included are: SLG4SA20-65x64 socket adapter, 50 SLG46827A samples.

SLG46827AG-SKT
$35.00
Back to results

GreenPAK and GreenFET

8 months ago

SLG4DVKGSD not working

Posted by Rafaela Freitas 89 points 15 replies
2 upvotes

Hello, 

I bought 2 SLG4DVKGSD that are In-System Debugging/Programming, but both does't work. Just by connecting the SLG4DVKGSD at USB port computer, the Status LED off and the Power LED blinking. The LEDs in that condition, indicates an 'Overvoltage protection at VDD line'. Tha datasheet says it happens when external power supply voltage exceeded 5.6V.

I checked the USB port with an multimeter, and there is only 5,01V in the USB port. I also tried to connect the SLG4DVKGSD at a variable power source, with 3.3V at VDD, but nothing changed.

I download the following document on dialog site: um-gp-004_user_manual_greenpak_serial_debugger_1v0.pdf, and I would like to know if there is a newer version.

I would like to know if it is possible to fix those SLG4DVKGSD, since I waited a long time to receive and now I need to start work.
 

Thanks a lot

Attachment Size
SLG4DVKGSD 598.86 KB

8 months ago

ssaravan

Hi Rafaela,

Thanks for reaching out. It is unfortunate that both of your GSDs don't work. Could you let me know which version of OS and GPAK designer SW you are using? Did you try to start the emulator in the GPD?

Kind Regards

Shivani

8 months ago

Rafaela Freitas 89 points

Hi Shivani, 

I am using OS: Windows 10 Pro (64 bits), and GreenPAK Designer v.6.25.

When I use the SLG4DVKGSD, the emulation button is gray, so I can not click. I don't know if its missing some configuration.

Just sent an imagem of how it appears.

 

Thanks in advance.

Attachment Size
forum2.PNG 12.79 KB

7 months ago

Hi,

I am experiencing the same issue with my SLG4DVKGSD. Is there a fix?

7 months ago

ssaravan

Hi,

Please try using the ELT tester SW. Its a simple tester which requires 4 steps. To start , select GSD from the drop down menu. After the device is connected, execute Step 3 and 4. Please send me the screenshot of the log as you go Step by step. Please send me a short email so that I can send you the Tester files

Best Regards

Shivani

6 months ago

Klaus Moelholm 70 points

Hi Shivani,

What is Your Email address?

Best regards

Klaus Moelholm

6 months ago

Klaus Moelholm 70 points

Hi,

I am experiencing the same issue with my SLG4DVKGSD. Is there a fix?

Best regards

Klaus Moelholm

5 months ago

gordonmacnee 220 points

I also had a  problem with the GreenPAK Serial Debugger.

When first plugged in the amber power LED flashes indicating an over voltage. We (Roman Dumych) tracked the issue down to a the USB interface. This can be corrected using the latest version of the ELT software. In step 1, select ‘GreenPAK Serial Debugger’ , step 2 ‘Write Descriptor’ and steps 3 and 4 should show ‘passed’.

5 months ago

Klaus Moelholm 70 points

I don't have the ELT software. Do You know where I can get it?

5 months ago

leonard.bacinello 10 points

Hello,

I have exact same issue and I'm really stuck in my development. Could you indicate us how to get this "ELT software" please ? Does gordonmacnee's procedure resolve the issue then ?

Thank you

5 months ago

Rafaela Freitas 89 points

I am also waiting for the same. Please help us with ELT software and procedure.

Thanks in advance.

5 months ago

ED_Dialog

Hello All,

Sorry for the slow response.

I have been looking into this issue and it seems to be a hardware problem.

Previously we had the in-system programmer board, this was primarily used to program the SLG46824, SLG46826 and the SLG47004 devices in system.  This board has been altered and rebranded as the in-system debugger, this can now be used to program the SLG46824, SLG46826 and the SLG47004 and can also be used to put any device with I2C access into emulation mode. However, it would seem that a revision of the in-system debugger board has a hardware issue. We do not have a viable workaround for those boards.

 

The in-system debugger board has now been made unavailable on our website.

 

I think the solution here is to check for the original ISP stock and replace the current board.

Kind regards,

ED 

accepted answer!

4 months ago

Klaus Moelholm 70 points

Hello ED,

We received a new serial debugger and it that works ok.

Best regards

Klaus Moelholm

accepted answer!

4 months ago

leonard.bacinello 10 points

Hello,

I received also a new programmer and it works well and as expected.

Thanks for the support.

Regards

1 month ago

Hi,

It sounds like the SLG4DVKGSD board that I have has the hardware issue described above. How can I get a replacement? Is there someone at Dialog/Renesas that I should contact?

Thanks!

1 month ago

olehs

Hi j4cbo, 

Could you send me (oleh.sapiha@diasemi.com) your contact data, so our local FAE can contact you? 

Best regards, 

Oleh Sapiha