Skip to main content

DA14583 Development Kit - Pro


The DA14585 and DA14586 are recommended for new designs.

 DA14583 Board - Pro

Get ahead of the competition

The DA14583 development kit Pro is ideal for software developers who want total control over their software development and want to keep an eye on the power consumption of their application. The Pro kit consists of a starter kit and a daughterboard kit.

The starter kit contains the DA14580 motherboard that can be combined with the DA14583 QFN40 daughterboard and gives you access to all of the package’s GPIOs. The kit’s on-board SEGGER chip gives you complete debugging capability while dedicated on-board circuitry allows you, in combination with our complete software environment SmartSnippets™, to profile and fine tune the power consumption of your application to get the most out of DA14583’s advantages.

SmartBond™: power, size and system cost without compromise

Starter Kit

Bluetooth low energy DA14580 motherboard

Bluetooth low energy USB Dongle

CR2032 battery

USB cable

Quick starting guide

Daughterboard kit

The DA14583 daughterboard kit to fit the starter kit is available as follows:

  • 1x QFN40 daughter board
Product Briefs and Summaries
Name Date Version
SmartBond™ DA1458x Family Product Brief (2.82 MB) 22/06/2017 1.0
Name Date Version
DA14583 Datasheet (2.46 MB) 04/11/2016 3.0
Application notes
Name Date Version
AN-B-051 SmartSnippets Power Profiler Calibration (829.62 KB) 20/02/2017 1.0
AN-B-052 DA145Xx/68x Development Kit J-Link Interface (492.82 KB) 14/02/2017 1.0
Layout Guides
Name Date Version
Layout and board design files of the DA14583 IoT sensor design kit(25.01 KB) (Registered users only) 08/03/2016 1.0
Name Date Version
DA14580/581/583/585/586 DEVKT -Pro MAINBOARD: Electrical Schematic, BOM-, Layout-, Design-, Gerber- and ReadMe-files (3.32 MB) 08/10/2018 C
DA14580/581/583/585/586 DEVKT -Pro vC MAINBOARD: Electrical Schematic (214.32 KB) 20/06/2018 C
DA14583 DEVKT -Pro Daughterboard QFN40 Electrical Schematic (52.1 KB) 25/06/2015 1.0
DA14583 DEVKT -Pro Daughterboard QFN40: BOM-, Layout-, Design-, Gerber- and ReadMe-files (989.28 KB) 26/07/2018 1.0
Schematic of the DA14583 IoT sensor designkit(25.01 KB) (Registered users only) 08/03/2016 1.0
Software Resources
Name Date Version
DA14583 IoT Sensor Firmware(25.01 KB) (Registered users only) 08/03/2016 1.0
DA1458x Software release notes IoT designkit(7.58 KB) (Registered users only) 08/03/2016 1.0
User guides and manuals
Name Date Version
UM-B-034 DA14580/581/583 Development Kit - Pro User Manual (3.19 MB) 31/01/2016 1.4
UM-B-049 DA1458x Getting started with Development Kit - Pro (4.05 MB) 30/03/2017 1.2
UM-B-064 DA14583 IoT sensor hardware reference application (1.2 MB) 10/03/2016 1.0
UM-B-065 Bluetooth Smart Communication Interface Board (1.25 MB) 31/10/2016 1.0

Ordering information

Motherboard: DA14580DEVKT-P

Daughterboard QFN40: DA14583F01ATDB-P

Buy now

Product Shop
DA14583 Development Kit- Pro Digikey Mouser Avnet Silica Avnet US Farnell
Sort by:

5 months ago


Unable to interface with DA14583 flash with SPI

Posted by eng-k 30 points 1 reply

7 months ago


DA14583 dsps source code

Posted by 30 points 3 replies

4 years ago


Switching between sleep modes with SUOTA

Posted by Ankit 0 points 1 reply

4 years ago



Posted by Ankit 0 points 3 replies

4 years ago


Battery monitoring using DA14583

Posted by vishnuatdialog 0 points 1 reply

4 years ago


DA14583 software issue

Posted by goutham 0 points 1 reply

4 years ago


Tx power field in iBeacon advertising

Posted by hiren.bhuva 0 points 1 reply

3 years ago



Posted by GREESHMA KV 0 points 3 replies

4 years ago


Dual mode configuration peripheral and central

Posted by Rajapurerohit 0 points 5 replies

1 year ago


HCI vendor specific command for RF test

Posted by tachyon7 0 points 1 reply