Skip to main content


AC/DC Converter Configures Output Current in Real Time To Enable Smaller, Low Cost 30W Universal Input Adapters/Chargers


<30mW No-Load Power Using Adaptive Voltage Positioning Control IC (iW676)

The iW1608 is an AC/DC controller optimized for universal input voltage applications. The device offers a unique output current limit configuration that monitors the input voltage via the resistor divider (CFG pin voltage VCFG) in real time and adjusts the output current limit accordingly.

Travel adapters designed with the iW1608 can provide higher power at 230VAC input voltage and can reduce the current limit at low supply voltage (90VAC) for lower power dissipation and safe operation during peak loss conditions. This enables the use of a smaller adapter case size while maintaining high current output at high line. The adjustable current limit also provides additional application possibilities, including peak charging using a temperature sensor to decrease the output current after the adapter reaches a maximum allowed temperature.

The iW1608 also offers configurable light-load operating modes where designers can optimize their circuit for either low no-load power consumption or fast DLR response. For applications that require both, the iW1608 can work with the iW676 digital synchronous rectifier with integrated active voltage positioning (AVP) control, enabling <30mW no-load standby power and fast DLR response time.

The iW1608 integrates a full array of protection features including output over-current, short circuit, over-temperature and output over-voltage protection circuits.

Works with iW673 digital synchronous rectifier for low cost, high efficiency applications.

Works with iW676-30 digital synchronous rectifier with active voltage positioning control for high efficiency and <30mW no-load power consumption.


Real-Time Output Current Adjustment 30W AC/DC Digital Controller

Programmable Light Load Mode to Optimize No-Load Power Consumption and DLR

  • < 30mW No-Load Power Consumption with Fast DLR (using the iW676 Secondary-Side Controller with Active Voltage Positioning)
  • < 75mW No-Load Power Consumption with Faster DLR without Secondary-Side AVP Controller

Compliant with DoE Level VI and EU’s CoC, Version 5, Tier 2 External Power Supply Standards

PrimAccurate™ Primary-Side Regulation Technology

  • Eliminates Need for Optocoupler

Full Protection Features

  • Output Short Circuit Protection
  • Output Over Voltage Protection
  • Output Over Current Protection
  • Over Temperature Protection


Universal Input Travel Adapters up to 30W

AC/DC Adapters for Consumer Electronics

Block Diagrams


Typical applications diagram


Functional block diagram

To order a sample of any of our products, please complete the following form. We will provide up to five parts free of charge. Our sales department will provide pricing for samples orders exceeding five parts.

Sample Request Form

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives Register for newsletters
Product Briefs and Summaries
Name Date Version
iW1608 Product Summary (388.88 KB) 06/05/2019 1.0
Name Date Version
iW1608 Datasheet (1.16 MB) (Registered users only) 06/05/2019 1.0
Reference designs
Name Date Version
Reference Design EBC10228: iW1608-00B and iW673-20 5.5V/2.5A and 5.5V/2A Dual Current Limit Charger Design (2.9 MB) (Registered users only) 10/04/2019 1.0